#White macbook replacement keyboard install
#White macbook replacement keyboard pro
#White macbook replacement keyboard windows

MacBook 5.2 – 55-watt-hour removable lithium-polymer. Battery: MacBook 5.1 – 45-watt-hour removable lithium-polymer.1 × Combined optical digital output/analog line out. Combined optical digital input/analog line in. Input: Multi-touch glass trackpad which also acts as the mouse button.Two slots for PC3-8500 DDR3 SDRAM (1066 Mhz). Ports: Mini DisplayPort, replacing the previous model’s mini-DVI port.1 × Optical digital / analog audio line-out. 1 × Optical digital / analog audio line-in. Connectivity: Integrated AirPort Extreme 802.11a/b/g/draft-n (BCM4322 chipset).

#White macbook replacement keyboard windows

Graphics: Integrated Nvidia GeForce 9400M with 256 MB shared with main memory (up to 512 MB available in Windows through Boot Camp).

Display: 13.3-inch LED backlit glossy widescreen LCD, 1280 × 800 pixel resolution.

macOS 10.12 “Sierra” unofficially with Sierra Patcher.

OS: Latest possible operating system OS X 10.11 El Capitan officially.

Internal Slot-loading Super-Drive: 4 × DVD+R DL writes, 8× DVD±R read, 4 × DVD±RW writes, 24 × CD-R, and x CD-RW recording.

Memory: 2GB (two 1GB), expandable to 8GB (4GB supported by Apple).

MacBook 5.2 (Early 2009): Introduced on January 21, 2009.

MacBook 5,1 (Late 2008 Aluminum): Announced on October 14, 2008.

It was replaced in October 2009 by the unibody polycarbonate model. This MacBook model was shipped in a single configuration, with 2 GB of RAM. The hard disk capacity was increased to 160 GB. The processor speed was increased by 6.5% to 2.13 GHz. Introduced in May 2009, the MacBook 5,2 (13-inch, Mid 2009) was a modest speed-bump of the previous MacBook. This MacBook model was shipped in a single configuration, and was replaced in June 2009 with a new model. The graphics chipset received a significant upgrade. The processor ran at a slightly slower clock-rate. Introduced on January 21, 2009, the MacBook 5,2 (13-inch) was a feature-bump of the existing low-end white MacBook model.

7.2 MacBook (13-inch, 2.0GHz Intel Core 2 Duo, Early 2009).

6.2 MacBook (13-inch, 2.0GHz Intel Core 2 Duo, Late 2008 Aluminum).

6.1 MacBook (13-inch, 2.4GHz Intel Core 2 Duo, Late 2008 Aluminum).

If you have multiple damaged keys, it might sense to replace the entire top case assembly with the keyboard.

#White macbook replacement keyboard install

Install the bottom arrow key as we did in steps 3-5. Install the key retainer on the target keyboard. Seat the plunger in the right position on the target keyboard and let the glue dry.Īt first, I tried applying some pressure on the plunger but it didn’t work, because the plunger just kept moving around.įinally, I just reapplied the glue and let the plunger to seat by itself for about 10 minutes without applying any pressure on it. The first time I wasn’t careful enough and the glue filled up the plunger.

#White macbook replacement keyboard pro

On my target MacBook Pro one of the metal hooks was bent so I corrected the problem.Īpply a small amount of super glue on the plunger edges. You can use a very small knife to separate the plunger from the keyboard. Try to remove it from the keyboard as clean as possible, so the bottom side of the plunger remains as flat as possible. Very carefully separate the silicone plunger from the donor keyboard. Inspect the bottom side of the key, make sure that holders are not damaged.Ĭarefully remove the key retainer from the donor keyboard. Remove the bottom key from the donor keyboard. Push on the button until it snaps on the retainer. Make sure the holders engage with the retainer.

Seat the side with holders on the edges of the key fist. In my case the left side of the key cap should be seated properly. When you install the key cap on the retainer, make sure to seat the side with holders on the edges of the key fist.

These holders secure the key cap to the retainer (hinge).

Turn the key cap over and inspect small plastic key holders on the bottom side of the key.